Tangent Formers – Electrical Enclosure Boxes & Wireways

Electrical Enclosure Boxes (16 Ga. Pre-Painted Steel)

Electrical Enclosure Boxes, blank fed rollformed the top edges with two different flange designs and tangent formed the sides. The lengths varied from 18” to 48”. Fourteen Electrical Enclosure Boxes per minute production rate.

48” Tangent Forming Press (Pass Through Design) Note! We also built an automatic Clinch Lock Unit to fasten the ends and boxes together in a single pass through operation. See Video Click Here

ELECTRICAL WIREWAY

(14 to 16 GA. Galvanized or Pre-Painted)

Electrical Wireway is produced 1′ to 10′ in 1′ increments. Sizes range from 2 1/2″ x 2 1/2″ to 12″ x 12″ in square and rectangular styles. The top flanges vary to accommodate a variety of hinge and screw cover designs.

A continuous knockout pattern is punched down both sides in a variety of patterns. The design is a Programmable Coil Fed Punch, Notch, and Cut To Length System to produce completed knockout blanks. They are then fed directly into the Form Press. The blanks are conveyed and positioned into the Form Press for an automatic programmable feed form cycle.

The 10′ Press will produce three shorter parts (1′ to 3′ long) each cycle or two 4′ or 5′ parts each cycle. Parts 6′ and longer will be produced one part per cycle. All parts are ejected automatically.

See Video
Click Here

48” Tangent Forming Press (Pass Through Design) Note! We also built an automatic clinch lock unit to fasten the ends and boxes together in a single pass thru operation.