Gun Safes

This system produced full wrapped four (4) sided housing ranging from 24″ x 24″ to 36″ x 72″ in three (3) depths (strip widths). The Coil Feed, Notched, Punched, Rollformed and Tangent Formed housings are complete and automatic. The front flange (4″ with a 2″ return) was Rollformed simultaneously with the 1-1/2″ back flange.

The Notched and Rollformed wrapper was fed directly into the programmed Tangent Former to produce the completed formed four (4) sided housing.

Safes are produced on a just-in-time basis with no set-up or scrap loss when changing part sizes within the coil width and gauge range.