Decoilers

American Sheet Metal Equipment Decoilers are designed to meet and exceed the specified requirements to assure years of long life and trouble free service. All Decoilers start with a heavy duty all steel weldment construction and quality Timken Bearings to support the Arbors. The coils are supported and held in position with the Internal Expanded Mandrel. Locking the inside core of the coil in place eliminates any sheet surface or edge contact as the strip uncoils and pays off the reel.

American Sheet Metal Equipment offers a variety of Heavy Duty Decoilers with a wide range of standard and special Drives and options. Over the years our engineering has developed special design applications for quick changeovers, multiple Inline Decoilers and self threading operations. With this in mind Special Drives and Loop Controls can be adapted to handle high speeds and / or sensitive materials.

Decoilers Home

Decoiler Pictures

Decoiler Specifications Decoiler Diagrams Coil Cars

 Dual Mandrel Decoiler

Dual Mandrel Decoiler

60" Decoilers

Dual Mandrel Decoiler

Dual Mandrel Decoiler 15,000# capacity with
Hydraulic Expansion and Hold Down Arms. 

10000 lb Decoilers

Two 10,000# Decoilers with over and under loop control
to simultaneously feed a Foam Panel Line.

 

Switching from one coil to another.

Our standard lines consist of three (3) Basic Payoff Applications.

Inline Decoiler Straightener

Inline Straightener pulls the coil
strip from a Drag Brake Decoiler.

Drag Brake Decoilers

The Drag Brake Decoiler is used on systems that rely on the inline equipment to pull the strip into the system. To point out a Drag Brake can be used with any Straightener, Rollformer or Rollfeed where the back tension will not affect the feed length accuracy. In general, used primarily on lighter weight coil applications where the coil can be manually fed into the system and / or rewound manually.

Drag Brake Decoiler

Drag Brake Decoiler feeding the Straightener and into the production system.

Motorized Drag Brake Decoilers

A Motorized Drag Brake Decoiler also relies on the inline equipment to pull the strip into the system. The motorize jog index feed rotates the expanded mandrel when threading or rewinding the strip back onto the coil. In production the Decoiler is a full drag brake operation utilizing inline systems to pull the coil strip from the coil.

Coil Cut-To-Length Lines Programmable Slit & Shear

60″ Coil Line using a Powered Decoiler with a Sonic Loop Control
(Shown as an under feed payoff with painted stock)

Powered Loop Control Decoilers

The Powered Loop Control Decoiler is designed to feed and payoff the coil strip into a free slack loop. In addition, a Powered Mandrel is used with a remote jog to assist in threading or rewinding the coil strip. Once threaded and placed in automatic, the Decoiler will continuously feed and payoff the coil stock into a free slack loop between the coil and the next inline system. A Slack Loop Control will vary the Arbor speed and monitor the feed for a smooth and effortless operation.

5 In-Line Decoilers

Five 25,000# Inline Decoilers pre-threaded for a quick changeover of a variety of materials and thickness.

Leave a Comment

Your email address will not be published. Required fields are marked *